|
產品名稱: 616WL系列壓差變送器
產品型號: 616WL系列
產品介紹
The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below.
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.
技術參數
介質： Air and non-combustible, compatible gases.
材質：Consult factory.
精度：±0.50% F.S., display accuracy ±0.5%.
穩定性：±1% F.S./yr.
溫度范圍：0 to 140°F (-17.8 to 60°C).
溫度補償范圍： 20 to 120°F (-6.67 to 48.9°C).
壓力范圍：See Catalog page.
熱效應：±0.02% F.S./°F (0.036% F.S./°C).
電源： 12-30 VDC (2-wire).
輸出信號： 4 to 20 mA.
調零： Digital, Push Button Adj.
環路阻抗： DC; 0-900 ohms maximum.
電流：DC; 38 mA maximum.
電氣連接：Screw-type terminal block.
過程連接： Barbed, dual size to fit 1/8" and 3/16" (3.12 and 4.76 mm) I.D. rubber or vinyl tubing.
封裝：NEMA 4X (IP66).
安裝方向： Vertical, consult factory for other position orientations.
重量： Without LCD 17 oz (482 g); with LCD 18 oz (510 g).
認證：CE.
選型表
|
EXAMPLE
|
616WL
|
1
|
AT
|
Series 616WL-1-AT Differential Pressure Transmitter, range 0-0.10" w.c., with aluminum tag.
|
|
SERIES
|
616WL
|
|
|
Differential Pressure Transmitter
|
|
RANGE
|
|
1
2
3
4
5
11
12
13
14
15
21
22
23
24
25
31
32
33
34
35
|
|
0-0.10" w.c.
0-0.25" w.c.
0-0.50" w.c.
0-1.00" w.c.
0-2.50" w.c.
0.10-0-0.10" w.c.
0.25-0-0.25" w.c.
0.50-0-0.50" w.c.
1.00-0-1.00" w.c.
2.50-0-2.50" w.c.
0-30 Pa
0-60 Pa
0-100 Pa
0-125 Pa
0-250 Pa
30-0-30 Pa
60-0-60 Pa
100-0-100 Pa
125-0-125 Pa
250-0-250 Pa
|
|
OPTIONS
|
|
|
AT
LCD
NIST
PRESETD
|
Aluminum Tag
Liquid Crystal Display
NIST Certificate of Calibration
LCD Display Set to 0-
|
|
免責聲明：以上所展示的[ 616WL 壓差變送器]信息由會員[北京艾凡鵬儀表有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
