藥用聚酯瓶中乙醛測定氣相色譜儀，液化石油氣，二甲醚，甲縮醛，乙縮醛，乙醇，室內空氣，焦?fàn)t煤氣，煉廠氣，天然氣，變壓器油，多氯聯苯，植物油，增塑劑，塑化劑，過氧化物

浩瀚色譜（山東）應用技術開發有限公司(原滕州市浩瀚色譜儀器技術服務有限公司）,是齊魯大地一家從事色譜儀器技術開發，技術推廣的技術型企業，研發出多款新型產品。（一）專用色譜柱：1.氯乙suan直接進樣分析專用柱2.氯化氫直接進樣分析專用柱3.氯QI直接進樣分析專用柱4.四氟化硅直接進樣分析專用柱5.六氟二甲基硅醚分析專用柱6.氨氣直接進樣分析專用柱（二）痕量分析專用氣相色譜儀：1.高純氣體中痕量水（ppb級）分析專用氣相色譜儀2.純苯中痕量噻吩（ppb級）分析專用氣相色譜儀（三）防腐型氣相色譜儀，并成功應用于氟氣，氟化氫，氯QI，氨氣，酰氯，氯化氫，三氯氫硅，四氟化硅，氯YI酸，氯HUA亞砜，硫化物，二氯化硫等腐蝕性物質檢測，產品遍布各個行業及地區，其中不乏有大型央企---中石油，中儲糧，秦山核電站，中紡集團等，部分出口。

公司主要業務

1.通用氣相色譜儀生產銷售：氫火焰檢測器氣相色譜儀，熱導檢測器氣相色譜儀，火焰光度檢測器氣相色譜儀，氮磷檢測器氣相色譜儀，電子捕獲檢測器氣相色譜儀。

2.便攜式氣相色譜儀，在線氣相色譜儀生產銷售。

3.專用氣相色譜儀研發制造：氧化鋯檢測器氣相色譜儀，氦離子檢測器氣相色譜儀，氬離子檢測器氣相色譜儀等。

4.防腐氣相色譜儀

5.二維，多維氣相色譜儀

6.高效液相色譜儀

7.實驗室純水機，頂空進樣器，自動進樣器，熱解析儀，氮?dú)淇瞻l(fā)生器，色譜耗材（色譜柱，石墨墊，穩壓閥，壓蓋鉗，頂空瓶，7725進樣閥等），分光光度計，電子天平，水分測定儀，干燥箱，離心機，玻璃儀器，化學試劑等整套實驗室設備生產銷售。

8.提供技術轉讓，建立分析方法。

9.從事舊色譜以舊換新的業務。

10.色譜柱研制，定做。

11.承接樣品的檢測業務。

12.承接國內外色譜儀器的維修，改裝業務。

浩瀚色譜（山東）應用技術開發有限公司，以客戶為中心，想客戶所想，銷售的不僅僅是產品，重要的是幫助客戶解決問題，架起心靈溝通的橋梁。

藥用聚酯瓶中乙醛測定氣相色譜儀
藥用聚酯瓶中乙醛測定氣相色譜儀 詳細信息：

浩瀚色譜（山東）應用技術開發有限公司分析藥用聚酯（PET）瓶中乙醛測定法現狀,并對其進行標準提高。方法:采用優化后的HS-GC法測定藥用PET瓶中乙醛殘留量。頂空平衡溫度40℃,定量環溫度50℃,傳輸線溫度60℃,對照品頂空平衡時間30 min,樣品頂空平衡時間8 h,進樣體積1 m L;色譜柱HH-Wax（30 m×0.320 mm×0.25μm）,柱溫50℃,進樣口溫度200℃,檢測器溫度250℃,載氣氮?dú)?柱流量1.5 m L·min^-1,分流比30∶1。結果:采用優化后的乙醛測定方法,乙醛對照品進樣量在0.2～3.0μg范圍內呈良好線性關系,r=0.999 6;高、中、低加樣回收率分別為98.6%、106.3%和100.4%。優化前后乙醛測定法測得乙醛含量結果無顯著性差異。結論:優化提高后的乙醛測定法能快速、準確地測定藥用PET瓶中乙醛含量,該研究為乙醛測定法的標準提高以及藥用PET瓶的質量控制提供指導意義。 

藥用聚酯瓶中乙醛測定氣相色譜儀  測試譜圖：


Gas chromatograph for the determination of acetaldehyde in medicinal polyester bottles
Gas chromatograph for the determination of acetaldehyde in pharmaceutical polyester bottles Details:

Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. analyzed the current status of acetaldehyde determination methods in pharmaceutical polyester (PET) bottles, and improved its standards. Methods: The optimized HS-GC method was used to determine the acetaldehyde residues in pharmaceutical PET bottles. The headspace equilibrium temperature was 40 °C, the loop temperature was 50 °C, the transfer line temperature was 60 °C, the headspace equilibrium time of the reference substance was 30 min, the sample headspace equilibrium time was 8 h, and the injection volume was 1 mL; ×0.320 mm×0.25 μm), the column temperature was 50 °C, the inlet temperature was 200 °C, the detector temperature was 250 °C, the carrier gas was nitrogen, the column flow rate was 1.5 mL·min-1, and the split ratio was 30:1. RESULTS: Using the optimized acetaldehyde determination method, the injection amount of acetaldehyde reference substance showed a good linear relationship in the range of 0.2-3.0 μg, r=0.999 6; the high, medium and low sample recovery rates were 98.6% and 106.3 respectively. % and 100.4%. There was no significant difference in the acetaldehyde content measured by the acetaldehyde determination method before and after the optimization. Conclusion: The optimized and improved acetaldehyde determination method can quickly and accurately determine the content of acetaldehyde in pharmaceutical PET bottles.

Gas chromatograph for the determination of acetaldehyde in pharmaceutical polyester bottles. Test spectrum: 



本頁產品地址：http://18bearing.com/sell/show-9235357.html